The TRM691E is a radio transmitter/receiver, powered in
series with the load. It is used for dimming incandescent,
LV and ULV halogen, and dimmable LED loads.
- 2 inputs for connection of pushbuttons, switches or
other automatic control contacts.
A dimming output (max. 200W ).
The inputs connected to the product are freely
programmable. They can control the local output or
Quicklink products can be configured together and
operated within the same radio installation.
Pushbutton or switch
Connecting wires of the 2 inputs for a switch or
Pushbutton and feature LED T of output
Pushbutton and configuration LED R
Phase 230 V
Dimming output 230 V
1 independent channel controlled by KNX radio.
(output 200W AC1 230V)
2 inputs for contact free of potential
Availability of output manual control by pushbutton
Display of output state on LED fct (red light ON =
The specific features of each product depend on
configuration and set-up.
Learning the load type
The first time it is turned on, the product undertakes
automatic learning of the connected lamp type. A brief
flicker may be observed during this phase (duration
2 to 3 s) after which the lamp type is stored in the
After a power outage or change of lamp, the dimmer
starts a new detection.
If the user notices unsatisfactory operation, the setting
can be edited manually.
Protection against overheating and overload
The product is automatically protected against
overloads, short circuits and overheating. In the event
of overheating or overload, the available power is