020 8874 0404

  Home > Products > Switching > Switch Actuators >

Switch Actuator, 2F 16-C, I-Det

Switch Actuator, 2F 16-C, I-Det

Price: £333.48 Exc VAT

Part Number: 2CDG110112R0011

Description technical Spec

Switch Actuator, 2F 16-C, I-Det

The 16/20 A Switch actuators SA/S x.16.6.1 are modular installation devices in Pro M Design for installation in the distribution board. The devices are especially suitable for switching loads with high peak inrush currents such as lighting equipment with compensation capacitors or fluorescent lamp loads (AX) to EN 60 669.

The Switch actuators feature one load current detection per output. The maximum load current per output is 20 A. Manual actuation of the switch actuator is possible using a button. This simultaneously indicates the switching state.

The Switch actuators can switch up to 12 independent electrical loads via floating contacts. The maximum load current per output is 20 A. The connection of the outputs is implemented using universal head screw terminals. Each output is controlled separately via the KNX.

Individual outputs can be copied or exchanged to reduce the programming effort withn the SA/S x.16.6.1 devices.

The device does not require an additional power supply and is ready for immediate use, after the bus voltage has been applied. The Switch actuators are parameterized via the ETS. The connection to the KNX is implemented using the bus connection terminal on the front.

How satisfied were you with the service we provided today? Share your knowledge of this product. Be the first to write a review »