LED universal dimming actuator, 2-gang

2 x 300 W, HV LED lamps typ. 2 x 3 ... 60 W
Rail mounting device, 4 rail units
ETS product family: Illumination
Product type: Dimmer

Intended use

• Switching and dimming of incandescent lamps, HV halogen lamps, dimmable HV-LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps
• Mounting on DIN rail according to EN 60715 in distribution boxes

Product characteristics

• Automatic or manual selection of the dimming principle suitable for the load
• Protected against no-load, short-circuit and overheating
• Signal in the event of a short-circuit
• Outputs can be operated manually
• Feedback of the switching position and the dimming value
• Parameterisable switch-on and dimming behaviour
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with run-on time
• Light scene operation
• Disabling of individual outputs manually or by bus
• Status indicator of the outputs via LED
• Operating hours counter
• Mains failure longer than approx. 5 seconds leads to switch-off of the dimmer actuator
• Depending on the parameter setting, the connected load is calibrated after resumption of power supply