Eikon TACTIL KNX 4-button switch
Part Number: 21840
Price: £158.66
Description
Eikon TACTIL KNX 4-button switch
Home automation control device, 4 independently programmable buttons for
managing single loads or scenarios, KNX standard, to be completed with a
label and Eikon Tactil cover plate - 2 modules
The device consists of 4 independent touch buttons that, via the KNX bus, enable controlling relay actuators, dimmer actuators and roller shutter actuators; they can also be used for calling up scenarios.
The device is to be completed with the Eikon Tactil cover plate; the buttons however react to mechanical pressure even without fitting the cover plate so the configuration and the first operating test can be performed in this condition.
FEATURES
The device consists of 4 independent touch buttons that, via the KNX bus, enable controlling relay actuators, dimmer actuators and roller shutter actuators; they can also be used for calling up scenarios.
The device is to be completed with the Eikon Tactil cover plate; the buttons however react to mechanical pressure even without fitting the cover plate so the configuration and the first operating test can be performed in this condition.
FEATURES
- Rated supply voltage Busbar: 30 V d.c. SELV
- Absorption from the Bus: 35 mA
- Terminals: TP BUS
- Operating temperature: -5°C - + 45°C (indoor use)
- Device settings:
- colour (can be selected from a list or by setting the RGB coordinates)
- button sensitivity (i.e., the amount of pressure required to actuate a command)
- buzzer on/off
- behaviour of the LEDs with the device on standby (off or with low brightness)
- Possible functions of the buttons:
- sending ON, OFF and timed ON commands
- ON and OFF switch on the up and on the down side
- Call up and save scenario
- Send value
- Dimmer control
- Toggle
- Possible functions of the buttons with 2 associated channels:
- ON and OFF switch
- Dimmer control
- Roller shutter control
- Proximity function:
- when the user draws her hand near, the device goes into "normal" operation and the LEDs light up brightly.
- if after 10 seconds no action is carried out, the device will go back onto standby and the LEDs will switch off or reduce their brightness.
- Cover plate cleaning function: the device recognizes simultaneously pressing multiple keys due to wiping with a cloth so no actions are carried out unless you dwell too long on the same area of the cover plate.