Description

PlanoSpot 360 KNX DE WH

Passive infrared presence detectors for ceiling installation
Flat design with interchangeable cover frame in different colors
Square detection area 360Â° (up to 64 m2) for reliable and easy planning
Automatic presence- and brightness-dependent control for lighting and HVAC
Two differently sized detection zones for greater flexibility. Adjustable via parameters or remote control.
Manual alignment of the detection area (swivel mechanism)
Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs
3 directed light measurements
2 light channels C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
Switched or constant light control with 2 independent control systems and standby function (orientation light)
Switching mode with dimmable lighting
Fully or semi-automatic
Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
Teach-in of the brightness switching value or the set point value
Light time delay configurable
Self-learning time delay can be set using parameters, object or via remote control
Reduction of time delay when present briefly (short-term presence)
Manual override by telegram or remote control
2 presence channels C4, C5, individually configurable
Switch-on delay and time delay configurable
Room monitoring with selective movement detection
Setting the room correction factor for brightness measurement comparison
Configurable sensitivity
Extremely simple setting of the energy-saving ratio with the new Â«eco plusÂ» function
Test mode for checking function and detection area
Scenarios
Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
Installation in false ceilings with springs
Surface mounting on ceilings possible with the AP-frame (optional)
User remote control Â«theSenda SÂ» (optional)
Management remote control Â«SendoProÂ» (optional)
Installation remote control Â«theSenda PÂ» (optional)