Description

Compact Passage KNX BK

Presence detector (PIR)
Mixed light measurement
Square detection area for corridors
Two outputs light for controlling two lighting groups
Switching or constant light control
Choice of fully or semi automatic operation
Presence output for HVAC control with switch-on delay and switch-off delay
Room monitoring with selective movement detection
Integrated bus coupling
SendoPro 868-A service remote control (optional)
Clic user remote control (optional)
The switching behaviour of the presence detector is controlled by presence and light, or as required in switching or constant light control operation modes
In the "switching" operation mode, lighting switches on with darkness and presence and off with sufficient light or when nobody is present. In the "constant light control" operation mode the sensor controls the artificial light daylight-dependent on a constant lighting level
The self-learning switch-off delay time adjusts to occupants' behaviour
Fully or semi-automatic: In "Fully automatic" mode, the lighting switches on and off automatically according to presence and light In "Semi-automatic" mode, it must be switched on manually and it switches off automatically
Manual override: Lighting or dimming can be manually controlled at any time
The presence detector has a mixed light measurement and is suitable for controlling the following types of lamp: LED, ESL, fluorescent lamps (FL/PL), halogen and incandescent lamps
Presence output for HVAC control : Switching behaviour is only controlled by presence
The switch-on delay prevents instantaneous switch on. The presence output only switches after the delay is completed
The monitoring output works with reduced sensitivity and indicates the presence of persons with a high level of accuracy
The brightness output makes the light information available for visualisation purposes
Master/slave parallel switching: Several detectors can be connected with each other to increase the detection area. The master controls lighting and HVAC. All other detectors merely provide presence information as slaves
Master/master parallel switching: Several detectors can be connected with each other to control several lighting groups. Every master controls its lighting group according to its own brightness measurements. Presence is detected by all the detectors
Master or slave operating mode is selected via configuration
Test operation mode checks the detection area and configuration
A maximum of 10 detectors can be switched at the same time