The TRM691E is a radio transmitter/receiver, powered in
series with the load. It is used for dimming incandescent,
LV and ULV halogen, and dimmable LED loads.
It includes:
- 2 inputs for connection of pushbuttons, switches or
other automatic control contacts.
-
A dimming output (max. 200W ).
The inputs connected to the product are freely
programmable. They can control the local output or
other outputs.
Quicklink products can be configured together and
operated within the same radio installation.
Caption
-
Pushbutton or switch
-
Connecting wires of the 2 inputs for a switch or
pushbutton
-
Pushbutton and feature LED T of output
-
Pushbutton and configuration LED R
-
Connector block:
Phase 230 V
Dimming output 230 V
Features
-
1 independent channel controlled by KNX radio.
(output 200W AC1 230V)
-
2 inputs for contact free of potential
In operation:
-
Availability of output manual control by pushbutton
-
Display of output state on LED fct (red light ON =
active output)
The specific features of each product depend on
configuration and set-up.
Learning the load type
The first time it is turned on, the product undertakes
automatic learning of the connected lamp type. A brief
flicker may be observed during this phase (duration
2 to 3 s) after which the lamp type is stored in the
product.
After a power outage or change of lamp, the dimmer
starts a new detection.
If the user notices unsatisfactory operation, the setting
can be edited manually.
Protection against overheating and overload
The product is automatically protected against
overloads, short circuits and overheating. In the event
of overheating or overload, the available power is
automatically reduced.