020 8874 0404

  Home > Products > Wireless > JUNG eNet >

eNet radio hand-held transmitter 2-gang

eNet radio hand-held transmitter 2-gang


 
Price: £49.65 Exc VAT


Part Number: FMHS2
Qty:

Description technical Spec
 

eNet radio hand-held transmitter 2-gang

Intended use

  • Hand transmitter for radio transmission of switching, dimming, blind movement and scene commands
  • Operation with radio actuators from the eNet system

Product characteristics

  • Two adjacent buttons each belong to one channel
  • Status indication with LED
  • Switch-on brightness of dimmer actuators can be saved
  • Battery-powered device
  • Scenes, radio hand transmitter, 2x: All Off, three individual scenes
  • Signalling of transmission errors can be switched off

Can be set with eNet server

  • Master dimming function
  • Scene All On
  • Operation locks

Supplementary functions with eNet server

  • Update of the device software
  • Reading of error memory

Operating light

  • Switching: Press the button for less than 0.4 seconds
  • Dimming: Press the button for longer than 0.4 seconds. The dimming process ends when the button is released
  • Switching on dimmer actuators at minimum brightness: Press the right-hand button for longer than 0.4 seconds
  • Switching on dimmer actuators at minimum brightness and dimming to maximum brightness: Press the left-hand button for longer than 0.4 seconds

Operating blind

  • Moving the Venetian blind: Press the button for longer than 1 second
  • Stop or adjust blind: Press the button for less than 1 second

Operating push-button actuator

  • Push-button: The load is switched on for the duration of the button-press

Recalling scenes

  • Press the scene button briefly

Changing scene

Actuators switch to the saved scene.

  • Setting a new scene
  • Press scene button for longer than 4 seconds

Actuators first switch to the old scene and save the new scene after 4 seconds.

Save switch-on brightness

With dimmer actuators a brightness value can be saved to which the dimmer actuator switches after a short button press.
The buttons of a channel are set as channel buttons.

  • Set required switch-on brightness
  • Press both buttons of a channel simultaneously for longer than 4 seconds

The light is briefly switched off and switched on again to the switch-on brightness. Switch-on brightness is saved.

Polling sum status

  • Press both buttons of a channel simultaneously for 1 to 4 seconds

Signalling of radio transmission and group status.


How satisfied were you with the service we provided today? Share your knowledge of this product. Be the first to write a review »