Module 1 flush mounted output 200W

TRM690G is a power supplied radio transmitter/ receiver 2-wire, supplied in series with the 230 V load. It is used to control incandescent, LV and ULV halogen, and dimmable LED lights.

It includes:

• 2 inputs for connection of pushbuttons, switches or other automatic control contacts.
• One output to connect an electric load in ON/ OFF mode.

The inputs connected to the product are freely programmable. They can control the local output or other outputs.

This product is part of the tebis system and can be remotely controlled by radio transmitters input products, push-buttons, remote controls.

Caption

• Pushbutton or standard switch
• Wires for connecting the 2 inputs for a switch or pushbutton
• Pushbutton and feature LED T of output
• Pushbutton and configuration LED
• Connector block:
  Phase 230 V
  Output connection, 230 V

Features

• 1 independent channel controlled by KNX radio. (output 200WAC1 230V).
• 2 inputs for contact free of potential.

In operation:

• Availability of output manual control by pushbutton
• Display of output state on LED fct (red light ON = active output)

The specific features of each product depend on configuration and set-up.