DALI gateway

Rail mounting device, 4 rail units
With manual electronic operation and LED status indication
ETS product family: Illumination
Product type: Dimmer

Intended use

• Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast
• Installation on DIN rail according to EN 60715 in distribution boxes

Product characteristics

• Control of up to 64 DALI devices in up to 32 groups
• Individual, group or central addressing
• Suitable for operation in emergency lighting systems
• 16 light scenes
• Effect control for dynamic lighting effects or colour games
• Read out DALI device state via KNX, e.g. brightness or luminaire error
• Manual operation of the DALI groups
• Restraint
• Feedback of switching state and brightness value in bus and manual mode
• Collective feedback
• Central switching function
• Disabling function for each DALI group
• Separate ON and OFF delay
• Staircase lighting timer with pre-warning function
• Corridor function: when combined with motion detectors, reduced continuous lighting, if no motion is detected
• Online or offline project planning of the DALI devices with ETS plug-in
• Short-circuit protection
• Surge protection
• Overload protection
• Operating hours counter
• Signal of the global switching status of the DALI devices, e.g. to switch off the mains voltage of the DALI devices to avoid standby losses
• An individual DALI device can be exchanged during operation without software