020 8874 0404

  Home > Products >

Touch&See control and display unit (no frame version)
Touch&See control and display unit (no frame version)


 


Part Number: EK-EC2-TP-00-NF
Price on application

Description technical Spec
 
Touch&See control and display unit (no frame version)
Description
ekinex® Touch&See is a KNX S-Mode device for switching, controlling and displaying bus functions. It is equipped with an integrated KNX bus communication module and is designed for wall installation on flush mounting box. Through a 3,5” touch-screen and a user interface organized in a sequence of graphical pages, it is possible to control and monitor KNX actuators and display information received from KNX actuators and sensors in a simple and intuitive way. The device can also operate as a room temperature controller receiving values from up to 4 KNX temperature sensors. The device is powered by the KNX bus line and requires an auxiliary power supply 30 Vdc SELV.
Main functional characteristics
Depending on the version, the device can be programmed to carry out a set of different functions such as:
• room chronothermostat for 4 independent zones
• ON/OFF switching of single loads or groups of loads
• dimming of lighting devices
• control of motor drives (for roller shutters, blinds, curtains, etc.)
• displaying of the status of auxiliary contacts (from safety/security devices, etc.)
• displaying of time and date of the internal clock or sent by a KNX timer
• displaying of values sent by a KNX wheather station such as temperature, wind speed, rain presence, brightness, etc.
• displaying of alarm messages
• recalling and saving of scenes
• sending on the bus of values (temperature, brightness, etc.);
• locking of the functions through password
• temporary block for screen cleaning.

How satisfied were you with the service we provided today? Share your knowledge of this product. Be the first to write a review »